Forward-Curved Blowers
- Superior Quality for your laboratory exhaust requirements.
- Airstream Integrity isolated from fan exterior and motor housing compartment.
- Airtight inlet and discharge connections.
- Shaft Seals contain corrosive and/or hazardous fumes.
- Steel Wheels are standard. Spark-resistant AMCA "B" aluminum wheels or corrosion resistant stainless steel wheels are available when required.
- Special Coatings available:
1. Epoxy for mild corrosive fumes and temperatures below 180º F.
2. Cen-FP (fluoropolymer) for severe corrosive fumes such as nitric, sulfuric or perchloric acids. - Wheels are balanced after coating
- Belt Driven fans are AMCA licensed for air performance.
- All fasteners in airstream are stainless steel.
Recommended CFM 100 through 1000 CFM
Sort by
Display
per page
| Item # | Blower Specifications | |
|---|---|---|
| FC-109 | 9 1/8 Inch Wheel Diameter Tip Speed (FPM) = 2.39 x RPM |
|
| FC-111 | 10 5/8 Inch Wheel Diameter Tip Speed (FPM) = 2.78 x RPM |
|
| FC-112 | 12 5/8 Inch Wheel Diameter Tip Speed (FPM) = 3.31 x RPM |
|
| FC-115 | 15 Inch Wheel Diameter Tip Speed (FPM) = 3.93 x RPM |
|
| FC-118 | 18 1/2 Inch Wheel Diameter Tip Speed (FPM) = 4.75 x RPM |
|
| FC-120 | 20 Inch Wheel Diameter Tip Speed (FPM) = 5.24 x RPM |