RE-24, Restaurant Exhaust Fans - Series RE

Performance certified is for Installation Type B - Free Inlet, Ducted Outlet.
Power rating (BHP) does not include transmission losses.
Performance ratings include the effects of a discharge scoop.

Specifications
Wheel Diameter 24-1/2 in
Blower Specifications 24.50 Inch Wheel Diameter
Performance Tables
Industrial Certification UL Certification


AMCA Certified Ratings


Central Blower Co. certifies that the Belt Drive Blowers are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and comply with the requirements of AMCA Certified Ratings Program.
Drawing
Scoop with Grease Trough
  • Sealed to blower housing with high temperature silicone foam
  • Grease trough easily removed for draining
  • Drain on grease trough allows rain water to run off while grease stays inside
  • Can be extended up or out for special applications
  • Scoop can be removed for extended discharge
Tilt Open Top Cover Assembly
  • Heavy duty self cleaning backward inclined wheel
  • Drives stay in adjustment when open for service
  • Sealed to blower housing with high temperature silicone foam
  • Heavy duty relubricatable bearings
  • Latch locks cover open when cleaning
  • Spare belt stored under weather cover
Safety Disconnect Switch
  • Standard (specify H.P., voltage and phase)
  • Weather proof enclosure
  • Factory wired to motor
Blower Housing
  • Heavy gauge zinc coated steel
  • U.L. recognized powder coating
  • Housing continuously welded top and bottom
Optional Funnel Fitting
  • All welded
  • Specify duct size when ordering
  • Side inlet fitting available. See factory for price.
Vented Curb
  • Galvanized Steel
  • Welded
  • Proper Height to place discharge 40" from roof
  • Wood nailer for roofing
  • One pc. curb allows roofing and duct installation before blower arrives
Standard Weather Cover
  • Heavy gauge zinc coated steel
  • Painted with UL recognized paint
  • Easily removed with simple hand tools
Hinge Kit with Prop Rod
  • Cannot close without operator release
Motors
  • Quality US made
  • Energy efficient
  • Sized to fit CFM requirements
  • Mounted outside away from heat & grease
Drives
  • Highest quality
  • Cast iron for long life
  • Variable pitch motor pulley allows speed adjustment in the field
Bearings
  • Highest quality
  • HD cast housing with lube fitting for maintenance
  • Ground and Polished shafts with keys
Warranty

Central Blower Co. (the Company) warrants that each blower manufactured by the Company shall be free from defects in material and work man ship under normal use and service for a period of eighteen (18) months from the date of shipment or twelve (12) months from date of original installation, "whichever occurs first." If it appears within the warranty period that the blower does not meet the warranties specified above and the purchaser notifies the Company promptly, the Company agrees to remedy any such defect, at the Company's option, either by repairing any defective parts or by furnishing at the Company's factory a repair or replacement part.

This warranty shall not apply to any equipment which has been repaired or altered in any way so as, in the Company's judgement, to affect its performance or reliability, nor which has been improperly installed or subject to misuse, negligence or accident. This warranty does not apply to electric motors, which however, carry warranty of the motor manufacturer. Warranty does not apply to drive belts. This warranty is expressed in lieu of all other warranties expressed or implied, and of all other obligations or liabilities on the Company's part. The Company neither assumes, nor authorizes any representative or other persons to assume for it, any other liability in connection with the sale of its equipment.